How To Get Water Out Of Charging Port: 4 Super Easy Steps

It probably means you or someone you know has had water in charging port if you’re reading this.  With so many people using their phones anytime and anywhere, it’s easy to make a mistake and end up in the rain, at a pool, or some other wet location.

Contents show

To find out how to get water out of charging port and stop that annoying error message from popping up again, keep reading. It may seem like a lot of steps, but each one is pretty simple. Once you clear the port and dry everything off, your phone should be back to normal again.

Let’s start with what not to do if your phone gets wet…

What You Must Not Do To Get Water Out of Your Charging Port

how to get water out of charging port

Here are several don’ts when you discover that water has entered the charging port.

Don’t Use Blowdryers or Ovens To Dry Your Phone.

While you may think the heat will evaporate the water trapped in your phone, it does more harm than good. The hot air from a blowdryer could warp and damage your delicate phone.  And the heat from an oven can harm the circuitry inside and cause permanent damage.

That’s why you should never use these appliances to dry your charging port.

Don’t Shake and Blow Your Phone Dry.

You might think that shaking the water out of your phone and then turning on the blowdryer for a few minutes to evaporate the water is a good idea. That’s not how to get water out of charging port. That’s because this could lead to water getting inside the circuits and the blowdryer might not be hot enough to evaporate all the water.

You could end up with a short circuit that damages your phone beyond repair.

Don’t Touch the Circuitry or Battery.

The circuitry inside your phone is designed to be water-resistant, but it’s not waterproof. That means you shouldn’t open up the phone, even if you want to manually dry the circuitry and battery.

You could cause more damage if you handle the circuitry or battery without using the correct tools.

Don’t Place Your Gadget in a Bag of Rice.

While rice can absorb water, it’s not a perfect way of getting water out of your charging port. Rice debris can remain stuck in the port, and it can cause more problems for your phone.

Don’t Push Anything Into the Port.

Things like tissues, paper towels, and cotton swabs can remain in the port while trying to dry it. It’ll further damage the connection points in the system.

Avoid Using Isopropyl Alcohol.

Isopropyl alcohol contains some water, so you’ll be adding more moisture to your device. The substance is also conductive, which can disturb the electrical current flowing through it. 

Don’t Use a Toothpick.

You may try to wrap cotton around a toothpick to remove the water, but it can damage the charging port interior. 

Don’t Let Your Device Stay Wet for a Longer Period.

You might also panic and do nothing to get rid of the water from the charging port. Your gadget could develop corrosion if it stays with moisture for an extended time.

What Are the Signs That Water Has Damaged My Phone?

Water is a big threat to your phone and it’s the number one cause of damage. There are many signs that water has done some damage to your phone. Here are a few of them:

– The screen freezes or does not work properly when you try to use it.

– It takes longer for the screen to turn on or off.

– The battery dies quickly and doesn’t charge.

– Displays a flickering screen when you turn it on.

– Shows a black screen with colorful vertical lines that won’t go away.

– Shows an error message when you try to turn the phone on or off.

– Doesn’t charge properly or turns off unexpectedly when it is charging.

– The phone can’t recognize the SIM card or says that there’s no service.

How To Get Water Out of Charging Port

With these ideas in mind, check out the following steps on how to dry charging port.

Step 1: Turn off your iPhone and let it dry overnight.

First, turn off your iPhone and remove the chargers, phone case, sim card, and headphone cables. And let it dry for as long as it can. There’s no point in trying to speed up the process with a blowdryer or anything else, as it could make things worse.

Try to get your iPhone to dry out naturally first. Put it in a dry, warm place, like a sunny windowsill, if possible. But ensure that the phone isn’t exposed to too much heat because it leads to permanent damage. Also, long periods of sun exposure can cause the battery to overheat, some parts to get damaged, etc.

Put your phone in a dry, warm room if you think a sunny windowsill can lead to irreparable harm to your device. The place must be well-ventilated. Leave your phone there overnight, or for as long as you can.

Ensure your device is standing upright to allow gravity to prevent the water from seeping further into the phone. 

Step 2: Place your phone in the middle of desiccants.

The desiccant is a substance that can attract and hold water molecules from the air. It can absorb the moisture from the phone’s charging port, which will lead to a dry environment for the phone. 

Desiccants come in many forms, such as silica gel, calcium chloride, and molecular sieves. Silica gel is a common form of desiccant because it is cheap and easy to find.

Surround your device with large desiccants to ensure they don’t find their way into the charging port. The substance will suck the moisture out of your phone.

Step 3: Exercise some patience.

The water in charging port may take a bit longer to dry up. So, you need to wait and leave your phone to dry for 24 hours.

Step 4: Try to power on the device.

When the 24 hours have expired, attempt to power on the phone. If it resumes charging without any hiccups, you can insert the sim card back. 

What To Do After You’ve Tried Everything?

You can try using a wireless charger – your phone and the charger must be dry.  There’s a good chance nothing will work if your device is still wet after following these steps. This is where you might have to bite the bullet and replace your phone.

You could ask for a new one if your device is under warranty. However, you might have to pay for a new phone if it’s out of warranty.

What Proactive Measures Can You Take To Prevent Water From Entering Your Charging Port?

First, you need to know several ways your device can get wet. Water can get into a charging port in many ways. Some of them are as follows:

– If there is any water on the surface of the phone, it may seep into the charging port when the device is lying with its screen up.

– If you have been using your phone near a sink or bathtub and water has dripped down onto it, it may also seep in through the charging port.

– If you’re using a wireless charger, any water droplets that are on your fingers or hands may get onto the charging pad and then onto your phone.

– Another way that water could get into the charging port is when you drop the phone into a puddle of water. Or if you spill something on your phone and then plug it in before wiping off any excess liquid.

In these cases, there may still be some residual liquid on the outside of your phone and this can seep inside through any openings that exist.

Ways of Keeping Your Device Dry

Use the following methods to ensure that your phone is dry.

Get a Waterproof Case

Waterproof cases can withstand being submerged in water. They’re made of a material that prevents water from getting inside and damaging the phone.

The phone case will have a seal or gasket around the edges that stops water from entering. There may be rubber or silicone seals on the corners of the case to help keep out water.

You should also make sure there are no openings for air to escape, as this could allow water to get in.

Opt for a Waterproof or Water-Resistant Phone

A waterproof phone is designed to be water-resistant. It has been tested and certified to withstand specific depths of water immersion for a particular amount of time without damaging the internal components.

This certification is called an IP code and ranges from IPX0 (no protection) to IPX8 (submersible up to 3 meters). 

The first thing you should do is check the warranty information to see if the phone is waterproof or water-resistant. If it’s not, then you should make sure that your phone has a protective case on it so that it doesn’t get wet when you’re out in the rain or washing your hands.

A device with waterproof capabilities could be more expensive than an ordinary one.

Use a Dry Bag

A dry bag is a waterproof bag that is sealed tight with a rubber band or sealant to keep water from getting in. It’s made of waterproof material to prevent any liquid from seeping in.

Try Water Distancing

Keeping yourself away from water that can damage your phone is a challenging task, but it’s one of the best preventive measures.

Frequently Asked Questions About How To Dry Charging Port

How can I get water out of my charging port?

With the charging port facing down, tap the device against your hand to knock the water out. However, be gentle with your phone because you can damage some fragile parts. 

What’s the easiest way to get water out of the charging port?

Leave it to dry on its own.

How long does it take to get water out of the iPhone charging port?

There’s no specific time frame, but leaving your gadget overnight to dry is ideal. 

Does water in charging port damage my phone?

Yes. Water in the charging port can cause corrosion. Corrosion occurs when water seeps into the metal and causes it to change its chemical composition. This can cause the phone to short circuit and stop working, or it can cause it to overheat.

For some phones, this water damage will be covered under warranty if you have an extended warranty plan. For other phones, though, you may need to pay for repairs out of pocket if your warranty has expired.

What to do if water is in my charging port?

Turn off your device immediately and remove accessories, such as chargers, phone case, battery (if it’s removable), and headphones.

What’s the warning if there is water in my charging port?

Phones have a mechanism that detects if there’s moisture in your phone. Apple gadgets will show the following message: “Charging not available: Liquid has been detected in the Lightning connector” when you plug in the wet phone.

But a message that says: Liquid detected in Lightning connector: Disconnect to allow the connector to dry” will appear when you connect a headset.

What do I do if the water in charging port doesn’t go away?

You need to call the customer service of your device supplier or manufacturer if you’ve tried all the steps to remove water from the charging port.

What must I not do to get water out of my charging port?

Apple has the following advice:

  • Avoid using a heat source or compressed air to dry your iPhone
  • Don’t insert things like cotton or paper, or any foreign objects into the Lightning connector.
  • Don’t put your iPhone in a bag of rice as this could cause serious damage.
Brett Jones
Latest posts by Brett Jones (see all)

Leave a Comment

Your email address will not be published.