So you want to know how to reset a power bank. In this blog, you’ll learn the three most straightforward rebooting techniques. Let’s get started.
Why You Should Reset Your Power Bank
Your power bank is a handy and powerful device that stores the power to charge your electronic gadgets. You can power it with an electric outlet or USB-Fi certified charger.
Even though the power bank has a built-in battery to store energy for later use, you may want to reset it.
Here are some reasons you should reset your power bank before using it again.
- First, the battery might have been drained while it was not in use, and you need to charge it at total capacity before you use it again.
- Second, you might have overcharged the battery, and you need to drain it before you use it again so that you don’t damage the batteries.
- Third, you could have used the power bank for a long time and want to reset it before using it again. It ensures that the device has enough charge in its battery when you need to use it next time.
Overall, resetting the power bank will clear the stored data and settings on the device and make it ready for use. It’ll help improve battery life and the device’s performance.
How To Reset Power Bank In 3 Simple Ways
Now that you understand why it’s vital to restart your power bank, keep tabs on the following easy rebooting methods.
Step 1: Connect your device to your laptop using the USB charging cable.
Step 2: Install by slotting one end of the cable into your power bank’s USB port. Also, insert the other end of the cord into the charging port at the other point of the cable. In the meantime, coil the cable around your power bank.
Step 3: Keep the computer’s wire fixed to the computer’s monitor while you wait for 10 seconds.
Step 4: Your power back will reset to its factory settings. You can restart your device to see if it’s working perfectly.
If you own a Samsung or Xiao Mi power bank, use the following ways to reboot your device. It may not work well with other models.
Step 1: Hold the “Power” button on the power bank until the battery can charge fully.
Step 2: For the Mi portable charger, press and hold the same button for 15 seconds to restart the device.
Step 3: After pushing the Samsung button, hold down the power button for 7.5 seconds for the device to work correctly.
Step 4: The power bank will automatically reboot. Drain the battery and recharge it again.
Step 5: If you want to charge the Xao Mi smartphone, the rebooted power bank can take between 12 and 13 hours.
Step 6: On the other hand, the Samsung power bank can take roughly 4 hours to recharge fully.
Step 7: Check the LED lights on the portable charger to see if your device is receiving power.
Step 8: Try the above instructions to reboot other power banks. Press and hold the power buttons until they reset. You will have depleted the batteries so that you can recharge them once more.
The last approach is a slight variation of the above methods to reboot your power bank.
Step 1: Instead of connecting your device to your computer USB, use the wall outlet to charge the power bank.
Step 2: Ensure the portable charger is in always-on mode. Press and hold the power button to wake the device.
Step 3: Hold the same button for 3 seconds until the LED lights blink and become solid.
FAQs: How To Reset Power Bank
How do you fix a power bank that won’t charge?
Here are a few things you can do to fix a power bank that won’t charge.
– Check the power bank’s voltage with a voltmeter. If the voltage is low, it could be because the battery inside is dead or because of another problem.
– Check your power bank’s charging port for any signs of damage and clean out any dirt or debris that may have built up in it.
– Use another device to charge your power bank and see if it charges normally. It’ll help you identify if your cord or outlet might be faulty.
– Try plugging the charger into another outlet. It might solve the issue if there was a problem with the outlet in question.
Why is my power bank not working?
Some factors that could cause your power bank not to work are:
– You do not charge the power bank all the way.
– The charger cable is damaged.
– The battery is dead, and you need to replace it.
– The device you’re trying to charge has a low battery.
– There’s a physical issue with the device you’re trying to charge.
How do you reset a portable power station?
The first step is to locate the reset button. The location of this button will vary depending on the model of the battery pack. It may be on the side or at the back of the pack.
Press and hold this button for 10 seconds. It’ll cause the battery pack’s cells to discharge and charge again.
The second step is plugging into your device and waiting for it to turn on before unplugging it from a charger. Or use the above three methods.
How do you calibrate a power bank?
Most power banks have a button that tells you the battery level. You should calibrate the power bank by pressing this button until the indicator light tells you the battery is full.
How long do power banks last?
The time a power bank lasts depends on the size of the battery that it has.
A power bank with a 10,000 mAh battery can charge your phone about two times before you recharge the device.
However, this will depend on your phone type and how much you use it.
How do I know if my power bank is charging?
The first thing is to check the battery icon on your phone. If it has reached 100%, it means the power bank is full. Unplug it from your phone.
The second thing is to look at the power bank’s LED indicator light. If it’s green, the power bank should be fully charged.
How do you maintain a power bank?
First, it’s essential to read the instructions and follow the manufacturer’s guidelines. Next, ensure your battery is fully charged before using it.
Finally, store your power bank in a cool, dry place when not in use.
Why does my power bank drain fast?
Here are some reasons your power bank drains fast.
- The battery is not original.
- You have overcharged the power bank.
- The power bank is not compatible with your device.
- The device has a low battery life and takes more power to charge it than the power bank can provide.
- You’re using the wrong USB cable to charge the power bank.