Your PS4 Controller Won’t Charge With USB? Here’s How To Solve It

Your PS4 Controller Won't Charge With USB Here's How To Solve It

There’s no doubt that the PlayStation 4 is one of the most desirable consoles on the market right now. If you have one yourself, you probably use it all the time, not only for gaming but for browsing the net and watching movies or YouTube.

One of the best things about console gaming is the ability to do things without being tied to a desk or having cumbersome wires all over the place when you’re trying to relax.

But of course, even the most energy-efficient controller needs to be charged eventually. But wait! You’ve plugged it in for hours now and still not even a bit of charge?

You’ve got a problem, and it seems to be a pretty common one with PS4 controllers.

Before we call it quits and order a shiny new one, there could be a few issues from minor tweaks to major spends that you can do to get your controller charging again.

All devices have charging issues once in a while, whether it be faulty cables, bad connections, or simply poor installation.

If your charger won’t even show the yellow charging light, looks completely dead, and won’t pick up a whiff of a connection, you’ve probably got a USB problem.

Unfortunately, PS4 controllers have a really bad habit of losing their functionality to charge via the USB port after a while. This is especially true if you favor one controller over the other, and tend to have one that does not get used for long periods of time.

The controllers tend to not even recognize that there is even a cable plugged in at all.

Main Reasons Your PS4 Controller Might Not Be Charging

Everything is fine, you’ve had your PlayStation controller for a year or two and it’s never given you a hint of grief. Then suddenly, without any warning at all, you plug it in and… nadda.

Perhaps it goes the yellowy-orange color of charging for a second or two or it doesn’t even register it’s being charged at all. You’ve wiggled your cable around, tried both USB ports, swapped the cables, and done the tried and true ‘off and on again’ trick with your PS4 but no luck.

Like other wireless controllers and devices, PS4s have their own sets of bizarre features that could cause them to eventually malfunction over time and there might be a host of reasons why it’s not working- we’ll go through them all now.

Cable Damage

If you often play with your cable dangling across your front room or your bedroom, chances are someones probably stepped on or tripped over your cable a few times.

Just like your laptop or smartphone chargers, PS4 chargers can suffer wear and tear and need replacing after a while. Have a look at your cable for any visible signs of damage, usually around the large USB connector or the micro USB connector.

PS4 controllers use Type A micro USB chargers which you can pick up for very cheap, though it’s a good idea to spend a few dollars more to get something that’ll last you a while.

PS4 Controller Charging Cable 10ft 2 Pack Nylon Braided Extra Long Micro USB 2.0

This is a good one to go for if you do find that it’s the cord that needs replacing. It’s extra-long, so you can still play on your sofa, nylon, and braided for extra strength, and comes in a two-pack which is always useful if you’ve got multiple controllers.

Controller Error

Another issue people complain about is that the controller will work fine when plugged into a cable, but won’t hold any charge without it.

This can be frustrating, especially if one second without your charger plugged in can render your controller useless. Resetting your controller might fix this issue however- read on to find out how.

Controller Batteries Have Died

The most common problem is that your controller’s batteries have simply died. Like phones, tablets, and other games controllers, PS4 controllers use lithium-ion batteries and after a while, they don’t hold a charge the same way they used to.

Like most batteries, they have a relatively short lifespan that can get overused and eventually run out. The lifespan on these is pretty limited and luckily, they can be replaced pretty easily.

Damaged Port

The charging port in your controller could be bent in a strange way or faulty. PS4 controllers use micro USB ports that have 5 pins that connect them to the cable and console.

If the cable gets pulled strangely or the controller falls on the floor a lot, these pins can get damaged, severing the connection at the port to the console.

Alternatively, your USB ports in your PS4 may be damaged for the same reason. If either of these ports is damaged you will not be able to charge your controllers.

How To Fix A PS4 Controller That Won’t Charge

Here are some great quick fixes and more technical things you can do to fix any of the PS4 controller charging issues that have been mentioned above.

Before you start reaching for the screwdrivers, be sure it’s not your PS4 that’s having any technical issues or that it has any physical damage such as faulty ports.

If you do see any physical damage or obvious issues with your PS4, take it to an authorized retailer to be looked at, as messing around with your PS4 by yourself can invalidate your warranty.

Restoring Your Controller To Factory Settings

Before you start getting out the toolbox or panicking about spending money, an easy fix that may do the job for you is restoring your PS4 controller to factory settings. To do this, follow the following instructions:

  • Make sure your PS4 is completely turned off and unplug it from the power source
  • On the back of your controller, you should see a tiny reset hole close to the L2 trigger
  • Find a pin, paper clip, or another small thin tool to press the reset button on your controller for a couple of seconds
  • Turn your PS4 back on and connect your controller via a USB charger

If this is the reason you’re controller has been acting up, you should now see the PS4 controller charging and being able to connect to your console. If this hasn’t worked, read on for some other possible solutions to your problem

Powercycle Your PS4 console

Another potential reason for PS4 controllers to lose their ability to connect or to charge could be the condition of your PS4 itself.

Before you take it to be repaired or looked at, it’s worth running a power cycling on your PS4. If the PS4 is not registering any bugs in the controller mechanism, this could be the reason why it’s not charging, as it simply isn’t registering the controller.

You’re not alone if this is the case, as thousands of PS4 users have encountered the same problem. On the same note, however, lots of users say that running their console through a power cycle has fixed these issues without too much hassle. Read on to find out how to do it.

  • First of all, turn off your PS4 console and controller as per usual
  • Remove the main power supply and disconnect the power from your PS4 at the back of the console.
  • Leave your PS4 idle for 10-15 minutes
  • Press and hold the power button at the front of your console for 30 seconds to drain any existing power from your PS4. Do this a few times to make sure all the remaining power is drained
  • Finally, reconnect the power, turn on your console and try to connect your controller

This has been a highly recommended fix for PS4 bugs so, you might get lucky. If your controller is still not working, read on for other possible solutions to your problem.

Check Your Controller Cables

Borrow a friend’s controller, use another one from around the house, or buy a new one.

You might think your charging cable looks fine, but the pins might now sync up as well as they used to, especially if the cable gets moved and puller a lot which a PS4 controller cable tends to be.

If a new USB cable doesn’t charge your controller, there’s something wrong with the controller itself.

Check Your Charging Port

Your PS4 charging port can collect all sorts of dirt and debris from your lounge or room. Over time, this dirt can get embedded in the ports and stop the connecting pins from registering any cables plugged into them.

If you can, use a magnifying glass to see if there is any debris stuck to the pins or any damage to the pins. A can of compressed air is a great help in cleaning out hard-to-reach areas.

Falcon Compressed Air Can

Try Charging A Different PS4 Controller Through The Same USB Cable And Port

Try Charging A Different PS4 Controller Through The Same USB Cable And Port

The main aim is to try and rule out any other possible means for faults.

If you have another controller that you know works fine, or a friend’s one you can borrow, try plugging it in the same setup you had for your non-working controller.

If your working controller then connects and charges fine, then you know it’s not the ports, the PS4 itself, or USB cables at fault.

Replacing Your Batteries In Your Controller

If you have tried all of the above steps and nothing has worked for you yet, you may have to replace the batteries on your controller. As with smartphones and other technological devices, PS4 controllers use lithium-ion batteries which degrade over time.

PS4 controller batteries have a defined lifespan of a certain number of charge cycles, and especially if you find yourself using your controllers non-stop, eventually the batteries will need replacing.

Click below for a direct link to a tutorial on how you can change the battery yourself easily.

YouTube Tutorial

Try Plugging Your Controller In Upside Down

When the ports start getting a little flimsy on the controllers, for some reason this works a treat for lots of people to hold the cable in place It’s not a permanent fix but does do the job sometimes!

Final Thoughts

Hopefully, these solutions have helped, if not unfortunately you might have to invest in a new controller. Try out a friend’s working controller first, however, to make sure it’s not an issue with your PS4 or cable setup.

Brett Jones